Touch computer control

      

 

 

 

 

 

Thick insulation 240-300mm

 

 

 

  

 

 
     


Explosionproof closures

  

Swiss heaters       

 

 

 

 

 

Forced circulation with both walls and floor

  

 

 

 

 

 

2 channel USB recorder + full history

 

 

Series SL Series SL Series SW Series SW Series  SW Series
Power Electricity Electricity Oil NG / LPG NG
Forced air circulation ✔ ✔ ✔ ✔ ✔
Two-channel USB temperature recorder ✔ ✔ ✔ ✔ ✔
Number of temperature sensors 1 MTS 2+ MTS 3+ MTS 3+ MTS 2+
Wall insulation thickness (mm) 80 240 240 240 240
Ceiling insulation thickness (mm) 80 300 460 460 460
Number of programs 1 20 20 20 20
Max. Number of steps in the program 1 10 10 10 10
Average heating time up to 180 ° C 40min 35min 25min 25min 20min
Number of door leaves 1 2 2 2 2
Diagnostics / update via the internet ✖ ✔ ✔ ✔ ✔
Media consumption meter ✖ ✔ ✔ ✔ ✔
Stainless steel ceiling elements ✖ ✖ ✔ ✔ ✖
Direct heating ✖ ✖ ✖ ✖ ✔
Explosionproof closures ✔ ✔ ✔ ✔ ✔
Silicone door seal ✔ ✔ ✔ ✔ ✔
Price group 1/2 2/5 4/5 5/5 3/5

Video

Automation

Enter the 21st century with our solutions

Automatic entry of slats option
The system of automatic entry of the slats enables quick entry of the slats into the furnace, without unnecessary movement of the operator to push them - from the level of the transport trolley, it saves time and heat energy.
The system precisely and automatically brakes the slats at the required point, without causing the risk of falling parts, when colliding with the door or the rear wall of the furnace. The operator usually introduces each slat in turn, this system is able to pull all slats at once, but each of them has its own independent drive. The system provides increased work comfort and time optimisation, increasing the effective working time.

Watch the video - how it works.

Automatic door opening  option
The automatic door opening system enables quick, non-invasive opening of the door, without unnecessary movement of the operator via one button - from the level of the transport trolley, saves time and heat energy. It provides increased work comfort and time optimisation, increasing effective working time.

Automatic programmable hood option
The hood has its own control, and it is possible to mount it also to foreign structures, based on the programmed parameters, the hood starts automatically after opening the door or other programmed event. Thanks to a powerful fan, it discharges gaseous products after the polymerization process.
.
x (x)

Comfort

Comfort of use thanks to which work becomes pleasant

7" touch panel
The large color touch panel looks aesthetically pleasing and is convenient and intuitive to use. You can set all important parameters on it.

Memory of 20 programs of 10 events
It is possible to save up to 20 programs and activate up to 10 subsequent time-temperature events forming a heating curve.
This is especially needed for more demanding processes.

Information on electricity consumption 
Consumption is calculated based on the oven's own settings from the touch panel. This function will allow you to estimate the costs of a given cycle, plan consumption and check staff.

USB
Each of the kilns is equipped with a recorder recording all firing parameters, including two temperature channels - as in an airplane black box, on a USB flash drive .

The system also enables the analysis of monthly/daily summaries, including media consumption and efficiency. Every start of heating, opening of the door, is to be recreated, several years back.

dual-channel recorder of cycle parameters This dedicated option is not offered by no manufacturer . It is a system developed from scratch by our programmers.

New 

New

Start baking automatically at 6am
How many times have you stayed overtime waiting for the cycle to end? if you've had a paint shop for a long time, you know exactly what's going on,

With our solution, you will leave the cycle unburnt in the furnace at the end of the shift, so that it will automatically end when you come to work the next morning.



Developed by professionals, for professionals

Automatic smoke exhaust chimney
The chimney can be programmed to open a few minutes before the end of firing, in order to vent smoke from the chamber.
It can be remotely controlled from the panel, you don't have to do it mechanically as in most constructions.

Minute forecast until end
The cycle has started, when will it end? calculating the dynamics of heating, we will calculate it and the display will show how much longer it will take.

Self-closing doors
To open them, just pull the door. The lock has adjustable door pressure, to close it, just push it, the lock will catch the door and automatically tighten it.

Heat hood  option
In order to minimize the heating effect of the hall when the door is opened, a hood is mounted above the door, dissipating part of the heat to other places.

x (x)

Flexibility

Solutions worth investing in

Furnace division (Guard) option
The bulkhead is a solution that allows you to buy a larger kiln and use only part of it for firing. The furnace is then equipped with a side-sliding wall and a modified control system.

2in1, i.e. drying with firing in a split kiln option
It is possible to use two chambers independently. The controller enables programming independent processes. For example, in the first chamber, the firing process can take place, while in the second, drying with completely different parameters, at a different time...

Airing the oven chamber option
Automatic ventilation is a system of fans and actuators that vents smoke from the chamber. Ventilation is an additional ventilation duct forcing air exchange. The system is used when fumes are generated in the firing chamber and must be discharged outside the kiln during the firing process.
.
x (x)

ThPID system

Unique systems to ensure the highest firing quality

ThPID



What is the ThPID system?

The ThPID system was created to eliminate the effect of inertia called hysteresis.
The standard solution is based on a system that heats with constant power on/off.
ThPID is a system in which, by means of voltage regulation, after reaching the set temperature, the heating power is selected that is currently needed - minimizing the effect of temperature fluctuations.

The ThPID system additionally allows you to cut the heating power of the furnace to a preset percentage value, eg in the absence of power at a given moment.

ROMER

ThPID (Voltage Regulation)

Other

Without ThPID (On / Off)

x (x)

MTS system

MTS system



What is the MTS system?

The MTS system was created to provide a real temperature reading of the oven chamber.
The standard measurement is based on a single temperature measurement which is often misleading.
MTS is a system of many sensors located in extreme places of the chamber.



Paint polymerization at 180 degrees Celsius

ROMER

MTS (Two or more sensors)

Other

Without MTS (One sensor)

x (x)

Heat & Cool

Heat & Cool


What are the Heat & Cool functions?

Our furnaces are equipped with functions that enable the determination of temperature increase or reduction over time with an accuracy of 0.01°C/min. The furnaces also allow you to set a temperature schedule according to predefined steps.

iCure recorder

software ROMER iCure

software ROMER iCure


software ROMER iCure is a computer program that allows full control of employees even several years back - it allows you to recreate any of the cycles from any day. iCure records each individual cycle, all signal inputs and outputs, all process parameters.



Storage capacity, virtually endless, m it is possible to keep a history of all cycles since the purchase of the stove .

Monthly capacity rollups
You no longer have to wonder how much electricity your stove uses, nothing will escape your attention.

iCure allows you to view the number of burns, consumption and the correctness of burns from any time period.

The system checks whether the details have been kept at the temperature for the appropriate period of time, if the cycle is interrupted, it is visible on the progress bar.

You'll always know how efficient your paint shop is.

x (x)

Security

You can feel safe with us

Explosion proof closures
Mthe assembly of the lock makes it possible to open the furnace from the inside in case the worker is locked in the chamber. This solution improves the tightness of the door, comfort of work and complies with the standards of EX furnaces - in the event of an explosion, the door will open automatically .

Self-diagnosis
The self-diagnosis system analyzes the correct operation of each component, preventing failures.		 Emergency cycle restart after power loss
You ran out of electricity. What happens if you don't have this system, and you don't remember what stage the cycle was at?
Entire load to improve.		 Analysis of connections correctness
If you loose a plug, the sensors will be swapped, you can be sure that you won't have to think about it.

Explosion-proof expansion damper
In the event of fuel detonation in the combustion chamber, an additional adjustable flap has been provided which will then open preventing the explosion.		 Overheat sensor
An additional sensor is activated when the upper temperature limit is exceeded, disconnecting the heating elements preventing damage to the elements.		 Securing directions of rotation
In case of changing the phase sequence on the power supply, we have a protection that verifies it.
x (x)

Industry 4.0

Solutions that allow you to create your own extensive systems

Programmable outputs
The solution allows you to program relay outputs in given steps, based on temperature, time.

It allows you to add, for example, a controllable vacuum pump to the production process of carbon fiber elements, based on the achievement of a given temperature, heating / cooling curves, etc.

RS485 ModBus communication
Virtually every romer device is built as standard based on a microcontroller, thus it can be fully controlled from the outside by master devices. Can work in Master/Slave mode.
After connecting it to the network, you can monitor its status, consumption, temperature, etc. on an ongoing basis. by providing data to the client's internal systems, e.g. CRM / ERP.

Process view

Solutions tailored to your needs

Glass in the wall
The solution allows the glass to be installed in specific places of the stove, on its side wall.

This allows you to view the annealed details from a close distance, especially when required by the process.

Furnace lighting
Lighting for high temperatures in the kiln in combination with the glass on the side wall allows the most demanding customers to see the firing process even better.
x (x)

VFD system

So that the paint does not migrate after the oven

VFD system



What is a VFD system?

The VFD system was created to reduce the effect of paint migration after the oven
The standard solution is based on a system in which the fan always rotates at the same speed.
VFD is a system in which the fan speed is regulated by adjusting the frequency of the voltage waveform while maintaining the torque of the drive motor.

Depending on the stage of paint burning, the revolutions are adjusted to the set ones - minimizing the effect of paint migration after the furnace, and accelerating the heating of details in the dryer.

ROMER

VFD (Frequency Control)

Other

No VFD

x (x)

Photos

x (x)

Transport methods

x x x x x x x
Upper tracks
xOption with two trolleys, the most popular. Outdoor trolley equipped with swivel rubber wheels. The system is used for small and medium loads. It reduces the content of impurities from the floor in the chamber. The outer trolley is painted with wet paint, the inner trolley is moved on this trolley. Inner carriage delivered as a frame with high temperature bearings on rolling wheels, unpainted ready to weld the superstructure
x x x x x x x x
Rails in the floor
x Option with two galvanized rails 70x70x4. The system is used for medium and heavy loads in large lines. This solution allows for one-time suspension of the element on the line, and then only moving it. Bottom carts
x

x

x x x x x x x x
x
x Option with one carriage, used for very heavy loads of several tons. The trolley is equipped with cast iron wheels on plain bearings. It prevents turning, the stroller only moves backwards and forwards. This option lowers the overall height of the stove by 100mm compared to the others. The trolley is delivered in the form of a frame with wheels. without superstructure, unpainted ready for welding.
x

x

x

x

x

x

x
x
x
x
x
x
x
x x